Dehydrated vegetables on modern industrial processes use the dryer Time:2015-08-24
Modern industry dehydrated vegetables dryer technology uses throwing generated by the vibration motor excitation force , the material in a given direction under the effect of centrifugal force jump forward , while the hot air under the bed so that the material input in a fluidized state , the material particles full contact with the hot air , hot air upward through the fluidized bed heat exchanger and wet material , wet air through the exhaust port after the cyclone dust discharge , dry material discharged from the discharge port . Dehydrated vegetable dryer surface damage of the material is small, fragile materials for drying , the drying process does not destroy the required shape, the particle or surface finish requirements of the material are the most appropriate , the object is heated evenly , heat exchange is fully dried high strength , drier than normal energy saving 30% -50%.
Changzhou Drying Equipment Co., Ltd. Kay Engineering dehydrated vegetables vibrating fluid bed dryer that support the entire body through the spring on the base , the discharge end of the perforated plate slightly tilted on one side or both sides of the body with vibration motor , with good drying features, but also according to process needs with materials, granulation , cooling, screening and conveying other processes, there is an enhanced special-purpose drying device , which is usually the final drying of the material used .
News Source : http://www.kgdry.com/Cn_Products.html
