Verify vibration fluidized bed dryer with what challenges Conditions Time:2015-08-24
Verify vibration fluidized bed dryer with what challenges conditions, material from the inlet into the machine, the vibrating force, the material thrown horizontally continuous movement forward. Hot air upward through the fluidized bed heat exchanger and wet material, wet air through the exhaust port after the cyclone dust discharge, dry material discharged from the discharge port. Vibration fluidized bed dryer residence time distribution, almost as a "plug flow" and is easy to adjust the residence time control, so obtained product moisture content is desirable, a fully enclosed structure, effectively preventing the material cross-contamination with the outside air, the operating environment clean, very low gas velocities in a uniform flow obtained, thereby significantly reducing power consumption, wear and dust particles entrained.
Changzhou Drying Equipment Co., Ltd. Kay Engineering vibration fluidized bed dryer entire body through the spring support on the base, the discharge end of the perforated plate slightly tilted on one side or both sides of the body with vibration motor, vibration motor throwing generated by the excitation force, the material in a given direction under the effect of centrifugal force jump forward, while the input air under the bed in a fluidized state of the material, the material particles in contact with the hot air sufficiently to achieve the desired effect, relying on mechanical vibration and perforated material flow dual fluidizing action and forward movement under the action of the vibration.
News Source: http://www.kgdry.com/Cn_Products.html
